Material Safety Data Sheet
1-(4-(trifluoromethyl)phenyl)propan-2-one
Section1 - Chemical Product and Company Identification
MSDS Name: 1-(4-(trifluoromethyl)phenyl)propan-2-one
Catalog Numbers: SC-14543
CAS No:N/A
Section 2 - Composition, Information on Ingredients
Chemical Name: 1-(4-(trifluoromethyl)phenyl)propan-2-one
Percent 95%
EINECS/ELINCS:
Hazard Symbols: Not available
Risk Phrases: Not available
Section 3 - Hazards Identification
Harmful if swallowed.
Potential Health Effects
Eye: May cause eye irritation.
Skin: May cause skin irritation.
Ingestion: Harmful if swallowed. May cause central nervous system depression, characterized by excitement, followed by headache, dizziness, drowsiness, and nausea. Advanced stages may cause collapse, unconsciousness, coma and possible death due to respiratory failure. May cause severe digestive tract irritation with abdominal pain, nausea, vomiting and diarrhea. May cause tremors and convulsions.
Inhalation: May cause respiratory tract irritation. May cause effects similar to those described for ingestion.
Section 4 - First Aid Measures
Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids.
Skin:Get medical aid. Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes
Inhalation:Remove from exposure and move to fresh air immediately. Get medical aid.
Section 5 - Fire Fighting Measures
General Information:wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Substance is noncombustible.
Extinguishing Media: Use extinguishing media most appropriate for the surrounding fire.
Section 6 - Accidental Release Measures
General Information: Use proper personal protective equipment as listed in Section 8.
Spills/Leaks:Vacuum or sweep up material and place into a suitable disposal container
Section 7 - Handling and Storage
Handling: Refer to section 8
Storage: 1.Keep in a cool,dry place
2.Keep container tightly closed
Section 8 - Exposure Controls, Personal Protection
Engineering Controls:Facilities storing or utilizing this material should be equipped with an eyewash and a safety shower facility. .
Personal Protective Equipment
Eyes: Wear chemical safety goggles.
Skin: Wear appropriate protective gloves.
Hygiene Measures: Wear appropriate protective clothing.
Respirators: Wear NIOSH/MSHA - approved respirator
Section 9 - Physical and Chemical Properties
Physical State: crystals
Color: yellow
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling point: Not reported
Melting Point:Not reported
Auto ignition Temperature: Not available
Flash Point: Not reported
Decomposition Temperature:Not available.
Solubility:Not available
Specific Gravity/Density: no data
Molecular Formula:
Molecular Weight:
Density:
Section 10 - Stability and Reactivity
Chemical Stability: Not available
Conditions to Avoid: Incompatible materials, dust generation, exposure to moist air or water.
Incompatibilities with Other Materials: Strong oxidizing agents, strong acids.
Hazardous Decomposition Products: Hydrogen bromide, oxides of lithium.
Hazardous Polymerization: Not available.
Section 11 - Toxicological Information
Toxicity Data:Not available
Carcinogenicity:Lithium bromide - Not listed by ACGIH, IARC, or NTP.
Other:See actual entry in RTECS for complete information
Section 12 - Ecological Information
Eco-toxicity:Not available
Section 13 - Disposal Considerations
Product: Contact a licensed professional waste disposal service to dispose of this material in a manner consistent with federal, state and local environmental regulations
Section 14 - Transport Information
Shipping Name: Not regulated
ADR/RID: Not available
Section 15 - Regulatory Information
Not any information.
Section 16 - Additional Information
The above information is believed to be accurate but does not suppose to be all inclusive and shall be used only as a guide. Reagent World makes no warranty of merchantability or any other warranty, express or implied, with respect to such information. Users should make their own investigations to determine the accountability of the information for their purposes in particular. In no way shall the company be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential of exemplary damages, howsoever arising, even if the company has been advised of the possibility of such damages.
© 2006-2015 Labseeker. All Rights Reserved.