Material Safety Data Sheet
2-bromo-dibenzofuran
Section 1 - Chemical Product and Company Identification
MSDS Name: 2-bromo-dibenzofuran
Catalog Numbers: 86-63529
Section 2 - Composition, Information on Ingredients
CAS#86-76-0
Chemical Name: 2-bromo-dibenzofuran
Percent 95%min
EINECS/ELINCS:
Hazard Symbols: Xi
Risk Phrases: 61-36/37/38-51/53
Labelling according Regulation (EC) No 1272/2008 [CLP]
Signal word Warning
Hazard statement(s)
H302 Harmful if swallowed.
H411 Toxic to aquatic life with long lasting effects.
Precautionary statement(s)
P273 Avoid release to the environment.
Supplemental Hazard Statements: none
Section 3 - Hazards Identification
EMERGENCY OVERVIEW
Harmful if swallowed. Irritate to eyes, respiratory system and skin. May damage fertility or the unborn child.
Potential Health Effects
Inhalation May be harmful if inhaled. May cause respiratory tract irritation.
Ingestion Harmful if swallowed.
Skin May be harmful if absorbed through skin. May cause skin irritation.
Eyes May cause eye irritation.
Section 4 - First Aid Measures
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled: If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact: Wash off with soap and plenty of water. Consult a physician.
In case of eye contact: Flush eyes with water as a precaution.
If swallowed: Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
4.2 Most important symptoms and effects, both acute and delayed
To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated.
4.3 Indication of any immediate medical attention and special treatment needed: no data available
Section 5 - Fire Fighting Measures
5.1 Extinguishing media
Suitable extinguishing media: Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
5.2 Special hazards arising from the substance or mixture: Carbon oxides
5.3 Advice for firefighters: Wear self contained breathing apparatus for fire fighting if necessary
Section 6 - Accidental Release Measures
6.1 Personal precautions, protective equipment and emergency procedures
Use personal protective equipment. Avoid dust formation. Avoid breathing vapors, mist or gas. Ensure adequate ventilation. Avoid breathing dust.
6.2 Environmental precautions
Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the environment must be avoided.
6.3 Methods and materials for containment and cleaning up
Pick up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable, closed containers for disposal.
6.4 Reference to other sections: For disposal see section 13.
Section 7 - Handling and Storage
7.1 Precautions for safe handling
Avoid contact with skin and eyes. Avoid formation of dust and aerosols.Provide appropriate exhaust ventilation at places where dust is formed.Normal measures for preventive fire protection.
7.2 Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
7.3 Specific end uses: no data available
Section 8 - Exposure Controls, Personal Protection
Engineering Controls: Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday.
Personal Protective Equipment
Eyes: Safety glasses with side-shields conforming to EN166 Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin: Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it.
Body Protection: impervious clothing, The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace.
Respirators: Where risk assessment shows air-purifying respirators are appropriate use a full-face particle respirator type N100 (US) or type P3 (EN 143) respirator cartridges as a backup to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU).
Section 9 - Physical and Chemical Properties
Physical State: Powder
Color: Off-white
Odor: Not available
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point:: Not available
Melting point: Not available
Autoignition Temperature: Not available
Flash Point: Not available
Explosion Limits: Lower: Not available
Explosion Limits: Upper: Not available
Solubility:
Decomposition Temperature:Not available.
Specific Gravity/Density: Not available
Molecular Formula: C12H7BrO
Molecular Weight :247.09
Section 10 - Stability and Reactivity
Chemical Stability: not available.
Conditions to Avoid:I Not available
Incompatibilities with Other Materials: Strong oxidizing agents.
Hazardous Decomposition Products: no data available
Hazardous Polymerization:Has not been reported.
Section 11 - Toxicological Information
RTECS#: CAS# 86-76-0
LD50/LC50: No data available
Carcinogenicity:
IARC: No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity: May cause congenital malformation in the fetus. Presumed human reproductive toxicant
Specific target organ toxicity - single exposure
Inhalation - May cause respiratory irritation.
Other Studies: The toxicological properties have not been fully investigated.
Section 12 - Ecological Information
Nor available
Section 13 - Disposal Considerations
Product: Offer surplus and non-recyclable solutions to a licensed disposal company. Contact a licensed professional waste disposal service to dispose of this material. Dissolve or mix the material with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber.
Contaminated packaging: Dispose of as unused product.
Section 14 - Transport Information
ADR/RID
No data reported
IMDG
No data reported
IATA
No data reported
Section 15 - Regulatory Information
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Xi, T
Risk Phrases:
R61 May cause harm to the unborn child.
R36/37/38 Irritating to eyes, respiratory system and skin.
R51/53 Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
Safety Phrases:
S26: In case of contact with eyes, rinse immediately with plenty of water and seek medical advice
S36/37/39: Wear suitable protective clothing, gloves and eye/face protection.
S45 In case of accident or if you feel unwell, seek medical advice immediately(show the label where possible).
Section 16 - Additional Information
While the information herein is believed to be reliable, it is furnished without warranty of any kind. It shall be used only as a guide. We assume no liabilities from the use of this product or information contained herein.
© 2006-2015 Labseeker. All Rights Reserved.