Material Safety Data Sheet
mono-methyl isophthalate
Section 1 - Chemical Product and Company Identification
MSDS Name: mono-methyl isophthalate
Catalog Numbers: 86-47023
Section 2 - Composition, Information on Ingredients
CAS#1877-71-0
Chemical Name: mono-methyl isophthalate
Percent 95%
EINECS/ELINCS:
Labelling according Regulation (EC) No 1272/2008 [CLP]
* Classification of the substance or mixture
Not a hazardous substance or mixture according to Regulation (EC) No 1272/2008
This substance is not classified as dangerous according to Directive 67/548/EEC.
* Label elements
The product does not need to be labelled in accordance with EC directives or respective national laws.
* Other hazards - none
Hazard Symbols: Xi
Risk Phrases: 36/37/38
Section 3 - Hazards Identification
EMERGENCY OVERVIEW
Harmful if swallowed. May cause irritation to eyes, respiratory system and skin.
Potential Health Effects
Inhalation: May be harmful if inhaled. May cause respiratory tract irritation.
Ingestion: May be harmful if swallowed.
Skin: May be harmful if absorbed through skin. May cause skin irritation.
Eyes: May cause eye irritation.
Chronic: No information found.
Section 4 - First Aid Measures
Eyes:Flush eyes with water as a precaution.
Skin: Wash off with soap and plenty of water.
Ingestion: Never give anything by mouth to an unconscious person. Rinse mouth with water.
Inhalation: If breathed in, move person into fresh air. If not breathing, give artificial respiration.
Notes to Physician: Treat symptomatically and supportively.
Section 5 - Fire Fighting Measures
General Information: Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion.
Extinguishing media: Use agent most appropriate to extinguish fire. In case of fire use Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide. Wear self contained breathing apparatus for fire fighting if necessary.
Section 6 - Accidental Release Measures
Personal precautions, protective equipment and emergency procedures: Avoid dust formation. Avoid breathing vapors, mist or gas.
Environmental precautions: Do not let product enter drains.
Methods and materials for containment and cleaning up: Sweep up and shovel. Keep in suitable, closed containers for disposal.
Reference to other sections: For disposal see section 13.
Section 7 - Handling and Storage
Precautions for safe handling: Provide appropriate exhaust ventilation at places where dust is formed.Normal measures for preventive fire protection.
Conditions for safe storage, including any incompatibilities: Keep container tightly closed in a dry and well-ventilated place.
Section 8 - Exposure Controls, Personal Protection
Engineering Controls: Use adequate ventilation to keep airborne concentrations low.
Personal Protective Equipment
Eye/face protection: Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin protection: Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it.
Body Protection: Choose body protection in relation to its type, to the concentration and amount of dangerous substances, and to the specific work-place., The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection: Respiratory protection is not required. Where protection from nuisance levels of dusts are desired, use type N95 (US) or type P1 (EN 143) dust masks. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU).
Section 9 - Physical and Chemical Properties
Physical State: Crystalline powder
Color: White
Odor: Not available
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available
Freezing/Melting Point: 194 - 196 °C
Autoignition Temperature: Not available
Flash Point: Not available
Decomposition Temperature: Not available.
Specific Gravity/Density: Not available.
Molecular Formula: C9H8O4
Molecular Weight: 180.16
Section 10 - Stability and Reactivity
Chemical Stability: Not available
Conditions to Avoid: No decomposition if used and stored according to specifications..
Incompatibilities with Other Materials: Strong oxidizing agents.
Hazardous Decomposition Products: Carbon monoxide, carbon dioxide.
Hazardous Polymerization: has not been reported.
Section 11 - Toxicological Information
RTECS#:
CAS#1877-71-0
LD50/LC50: RTECS:
Carcinogenicity:
IARC: No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC.
Other Studies: The toxicological properties have not been fully investigated.
Section 12 - Ecological Information
Additional ecological information:
General notes: no data available
Section 13 - Disposal Considerations
Product: Offer surplus and non-recyclable solutions to a licensed disposal company.
Contaminated packaging: Dispose of as unused product.
Section 14 - Transport Information
UN number
ADR/RID: - IMDG: - IATA: -
Shipping Name:
ADR/RID: Not dangerous goods
IMDG: Not dangerous goods
IATA: Not dangerous goods
Section 15 - Regulatory Information
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system and skin
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice
S 36 Wear suitable protective clothing
.
Section 16 - Additional Information
While the information herein is believed to be reliable, it is furnished without warranty of any kind. It shall be used only as a guide. We assume no liabilities from the use of this product or information contained herein.
© 2006-2015 Labseeker. All Rights Reserved.