cart(0)cart
       
Your Position: Home > DOCUMENTS & REFERENCE > MSDS > Methacrylic anhydride

Methacrylic anhydride

Material Safety Data Sheet
Methacrylic anhydride   
 
Section 1 - Chemical Product and Company Identification
MSDS Name:Methacrylic anhydride
Catalog Numbers: 86-34790

Section 2 - Composition, Information on Ingredients 
CAS#760-93-0
Chemical Name: Methacrylic anhydride
Percent  95%min
EINECS/ELINCS: 212-084-8 .
Hazard Symbols: Xn .
Risk Phrases: 20-37/38-41

Section 3 - Hazards Identification 
EMERGENCY OVERVIEW
May be harmful if absorbed through skin. May cause skin irritation.

Potential Health Effects
Eye:Causes eye burns.
Skin: May be harmful if absorbed through skin. Causes skin irritation.
Ingestion: May be harmful if swallowed.
Inhalation: Toxic if inhaled. Causes respiratory tract irritation.
Chronic: No information found.

Section 4 - First Aid Measures 
Eyes:In case of eye contact,Flush eyes with water as a precaution.
Skin: In case of skin contact,Wash off with soap and plenty of water.
Ingestion: If swallowed,Never give anything by mouth to an unconscious person. Rinse mouth with water.
Inhalation: If breathed in, move person into fresh air. If not breathing, give artificial respiration.
Notes to Physician: Treat symptomatically and supportively.

Section 5 - Fire Fighting Measures 
General Information: Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion.
Extinguishing media: Use agent most appropriate to extinguish fire. In case of fire use Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide. Wear self contained breathing apparatus for fire fighting if necessary.

Section 6 - Accidental Release Measures 
Personal precautions, protective equipment and emergency procedures: Avoid dust formation. Avoid breathing vapors, mist or gas.
Environmental precautions: Do not let product enter drains.
Methods and materials for containment and cleaning up: Sweep up and shovel. Keep in suitable, closed containers for disposal.
Reference to other sections: For disposal see section 13

Section 7 - Handling and Storage 
Precautions for safe handling: Provide appropriate exhaust ventilation at places where dust is formed.Normal measures for preventive fire protection.
Store in cool place. Keep container tightly closed in a dry and well-ventilated place. Containers which are  opened must be carefully resealed and kept upright to prevent leakage.
Store under inert gas. Moisture sensitive.

Section 8 - Exposure Controls, Personal Protection 
Engineering Controls: Use adequate ventilation to keep airborne concentrations low.

Personal Protective Equipment
Eyes: Tightly fitting safety goggles.  Faceshield (8-inch minimum). Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin: Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it.
Clothing: Wear appropriate protective clothing to minimize contact with skin.
Respirators: Where risk assessment shows air-purifying respirators are appropriate use a full-face respirator with multi-purpose combination (US) or type ABEK (EN 14387) respirator cartridges as a backup to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air
respirator. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU).

Section 9 - Physical and Chemical Properties 
Physical State: Liquid.
Color: Colourless.
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.

Viscosity: Not available.
 Boiling Point: 87 °C13 mm Hg(lit.)
Freezing/Melting Point: -20°C  .
Autoignition Temperature: Not available.
 Flash Point: 84 °C - closed cup. 
Decomposition Temperature: Not available.
 Specific Gravity/Density: 1,035 g/mL at 25 °C.
 Molecular Formula: C8H10O3 .
 Molecular Weight: 154.16 .

Section 10 - Stability and Reactivity 
Chemical Stability: Not available.
Conditions to Avoid: Not available.
Incompatibilities with Other Materials: Strong oxidizing agents, Strong bases.
Hazardous Decomposition Products: Not available.
Hazardous Polymerization: has not been reported.

Section 11 - Toxicological Information 
RTECS#: OZ5700000
CAS#760-93-0
LD50/LC50: RTECS:OZ5700000
Carcinogenicity:No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC.
Other Studies: The toxicological properties have not been fully investigated.
WGK Germany: 1

Section 12 - Ecological Information 
12.1 Toxicity
no data available
12.2 Persistence and degradability
no data available
12.3 Bioaccumulative potential
no data available
12.4 Mobility in soil
no data available
12.5 Results of PBT and vPvB assessment
no data available
12.6 Other adverse effects
no data available

Section 13 - Disposal Considerations
Product: This combustible material may be burned in a chemical incinerator equipped with an afterburner and scrubber. Offer surplus and non-recyclable solutions to a licensed disposal company. Contact a licensed professional waste disposal service to dispose of this material.
Contaminated packaging: Dispose of as unused product.

Section 14 - Transport Information 
14.1 UN number
ADR/RID: 3265                  IMDG: 3265                      IATA: 3265
14.2 UN proper shipping name
ADR/RID:  CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S. (Methacrylic anhydride)
IMDG:  CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S. (Methacrylic anhydride)
IATA:  Corrosive liquid, acidic, organic, n.o.s. (Methacrylic anhydride)
14.3 Transport hazard class(es)
ADR/RID: 8                       IMDG: 8                             IATA: 8
14.4 Packaging group
ADR/RID: II                      IMDG: II                               IATA: II
14.5 Environmental hazards
ADR/RID: no                     IMDG Marine pollutant: no                          IATA: no
14.6 Special precautions for user
no data available

Section 15 - Regulatory Information
European/International Regulations
      European Labeling in Accordance with EC Directives
           Hazard Symbols:Xn
           Risk Phrases:
                   R20: Harmful by inhalation
                   R37/38: Irritating to respiratory system and skin .
                   R41: Risk of serious damage to eyes
           Safety Phrases:
                   S26: In case of contact with eyes, rinse immediately with plenty of water and seek medical advice .
                   S39: Wear eye/face protection


Section 16 - Additional Information
While the information herein is believed to be reliable, it is furnished without warranty of any kind. It shall be used only as a guide. We assume no liabilities from the use of this product or information contained herein.