cart(0)cart
       
Your Position: Home > DOCUMENTS & REFERENCE > MSDS > TRIFLIC ANHYDRIDE

TRIFLIC ANHYDRIDE

Material Safety Data Sheet
TRIFLIC  ANHYDRIDE   
 
Section 1 - Chemical Product and Company Identification
MSDS Name:TRIFLIC  ANHYDRIDE
Catalog Numbers: 86-22456

Section 2 - Composition, Information on Ingredients 
CAS#358-23-6.
Chemical Name: TRIFLIC  ANHYDRIDE
Percent  98%min
EINECS/ELINCS: 206-616-8.
Hazard Symbols: C.
Risk Phrases: 14-22-35.

Section 3 - Hazards Identification 
EMERGENCY OVERVIEW
Causes eye burns.May be harmful if absorbed through skin. Causes skin burns

Potential Health Effects
Eye: Causes eye burns.
Skin: May be harmful if absorbed through skin. Causes skin burns.
Ingestion: May be harmful if swallowed.
Inhalation: May be harmful if inhaled. May cause respiratory tract irritation.
Chronic: No information found.

Section 4 - First Aid Measures 
Eyes:In case of eye contact,Flush eyes with water as a precaution.
Skin: In case of skin contact,Wash off with soap and plenty of water.
Ingestion: Harmful if swallowed. Causes burns.
Inhalation: May be harmful if inhaled. Material is extremely destructive to the tissue of the mucous membranes and upper respiratory tract.
Notes to Physician: Treat symptomatically and supportively.

Section 5 - Fire Fighting Measures 
General Information: Wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion.
Extinguishing media: Use agent most appropriate to extinguish fire. In case of fire use Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide. Wear self contained breathing apparatus for fire fighting if necessary.

Section 6 - Accidental Release Measures 
Personal precautions, protective equipment and emergency procedures: Avoid dust formation. Avoid breathing vapors, mist or gas.
Environmental precautions: Do not let product enter drains.
Methods and materials for containment and cleaning up: Sweep up and shovel. Keep in suitable, closed containers for disposal.
Reference to other sections: For disposal see section 13

Section 7 - Handling and Storage 
Precautions for safe handling: Provide appropriate exhaust ventilation at places where dust is formed.Normal measures for preventive fire protection.
Store in cool place. Keep container tightly closed in a dry and well-ventilated place. Containers which are
opened must be carefully resealed and kept upright to prevent leakage.
Never allow product to get in contact with water during storage.
Moisture sensitive. Store under inert gas.

Section 8 - Exposure Controls, Personal Protection 
Engineering Controls: Use adequate ventilation to keep airborne concentrations low.

Personal Protective Equipment
Eyes: Tightly fitting safety goggles. Faceshield (8-inch minimum). Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN166(EU).
Skin: Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices.Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it.
Clothing: Wear appropriate protective clothing to minimize contact with skin.
Respirators: Where risk assessment shows air-purifying respirators are appropriate use a full-face respirator with multi-purpose combination (US) or type ABEK (EN 14387) respirator cartridges as a backup to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air
respirator. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU).

Section 9 - Physical and Chemical Properties 
Physical State: Liquid.
Color: colourless.
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.

Viscosity: Not available.
 Boiling Point: 81-83 °C(lit.)
Freezing/Melting Point: -80°C.
Autoignition Temperature: Not available.
 Flash Point: 81-83°C. 
 Decomposition Temperature: Not available.
 Specific Gravity/Density: 1.677 g/mL at 25 °C(lit.).
Molecular Formula: C2F6O5S2.
 Molecular Weight: 282.14.

Section 10 - Stability and Reactivity 
Chemical Stability: Not available.
Conditions to Avoid: Not available.
Incompatibilities with Other Materials: Water, Strong bases, Strong oxidizing agents, acids, Alcohols
Hazardous Decomposition Products: Not available.
Hazardous Polymerization: has not been reported.

Section 11 - Toxicological Information 
RTECS#: Not available.
CAS#358-23-6.
LD50/LC50: RTECS: Not available.
Carcinogenicity:IARC: No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC.
TRIFLUOROMETHANESULFONIC ANHYDRIDE,98%min- Not listed as a carcinogen by ACGIH, IARC, NTP, or CA Prop 65.
Other Studies: The toxicological properties have not been fully investigated.
WGK Germany : 3

Section 12 - Ecological Information 
12.1 Toxicity
no data available
12.2 Persistence and degradability
no data available
12.3 Bioaccumulative potential
no data available
12.4 Mobility in soil
no data available
12.5 Results of PBT and vPvB assessment
no data available
12.6 Other adverse effects
no data available

Section 13 - Disposal Considerations
13.1 Waste treatment methods
Product: Offer surplus and non-recyclable solutions to a licensed disposal company.
Contaminated packaging: Dispose of as unused product.

Section 14 - Transport Information 
14.1 UN number
ADR/RID: 3265          IMDG: 3265                                          IATA: 3265
14.2 UN proper shipping name
ADR/RID: CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S. (Trifluoromethanesulphonic anhydride)
IMDG: CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S. (Trifluoromethanesulphonic anhydride)
IATA: Corrosive liquid, acidic, organic, n.o.s. (Trifluoromethanesulphonic anhydride)
14.3 Transport hazard class(es)
ADR/RID: 8             IMDG: 8                                                      IATA: 8
14.4 Packaging group
ADR/RID: II              IMDG: II                                                      IATA: II
14.5 Environmental hazards
ADR/RID: no             IMDG Marine pollutant: no                        IATA: no
14.6 Special precautions for user
no data available

Section 15 - Regulatory Information
European/International Regulations
      European Labeling in Accordance with EC Directives
           Hazard Symbols: C.
           Risk Phrases:
                    R14: Reacts violently with water
                    R22: Harmful if swallowed
                    R35: Causes severe burns
           Safety Phrases:
                    S26: In case of contact with eyes, rinse immediately with plenty of water and seek medical advice
                    S36/37/39: Wear suitable protective clothing, gloves and eye/face protection
                             
                    S43:In case of fire, use ... (indicate in the space the precise type of fire-fighting equipment. If water increases the risk add - Never use water)
                    S45: In case of accident or if you feel unwell, seek medical advice immediately (show label where possible)
                    S8: Keep container dry

Section 16 - Additional Information
While the information herein is believed to be reliable, it is furnished without warranty of any kind. It shall be used only as a guide. We assume no liabilities from the use of this product or information contained herein.