Material Safety Data Sheet
Trimethylsulfonium methyl sulfate
Section 1 - Chemical Product and Company Identification MSDS Name:Trimethylsulfonium methyl sulfate Catalog Numbers:SC-53951 Section 2 - Composition, Information on Ingredients CAS# 2181-44-4 Chemical Name: Trimethylsulfonium methyl sulfate Percent: 95%min EINECS/ELINCS: 218-750-4 Hazard Symbols: Xi Risk Phrases: 36/37/38 Section 3 - Hazards Identification EMERGENCY OVERVIEW Harmful if swallowed. Irritate to eyes, respiratory system and skin. Potential Health Effects Inhalation: May be harmful if inhaled. Causes respiratory tract irritation. Ingestion: May be harmful if swallowed. Skin: May be harmful if absorbed through skin. Causes skin irritation. Eyes: Causes serious eye irritation. Chronic: No information found. Section 4 - First Aid Measures General advice Consult a physician. Show this safety data sheet to the doctor in attendance. If inhaled: If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician. In case of skin contact: Wash off with soap and plenty of water. Consult a physician. In case of eye contact: Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician. If swallowed: Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician. 4.2 Most important symptoms and effects, both acute and delayed To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated. Notes to Physician: Treat symptomatically and supportively. Section 5 - Fire Fighting Measures 5.1 Extinguishing media Suitable extinguishing media: Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide. 5.2 Special hazards arising from the substance or mixture Carbon oxides, Sulphur oxides 5.3 Advice for firefighters Wear self contained breathing apparatus for fire fighting if necessary. 5.4 Further information no data available Section 6 - Accidental Release Measures 6.1 Personal precautions, protective equipment and emergency procedures Use personal protective equipment. Avoid dust formation. Avoid breathing vapors, mist or gas. Ensure adequate ventilation. Evacuate personnel to safe areas. Avoid breathing dust. 6.2 Environmental precautions Do not let product enter drains. 6.3 Methods and materials for containment and cleaning up Pick up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable, closed containers for disposal. 6.4 Reference to other sections For disposal see section 13. Section 7 - Handling and Storage 7.1 Precautions for safe handling Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Provide appropriate exhaust ventilation at places where dust is formed.Normal measures for preventive fire protection. 7.2 Conditions for safe storage, including any incompatibilities Store in cool place. Keep container tightly closed in a dry and well-ventilated place. Handle and store under inert gas. strongly hygroscopic. 7.3 Specific end uses no data available Section 8 - Exposure Controls, Personal Protection Engineering Controls: Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low. Personal Protective Equipment Eye/face protection: Safety glasses with side-shields conforming to EN166 Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Skin protection: Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands.: The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it. Body Protection: impervious clothing, The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace. Respiratory protection: For nuisance exposures use type P95 (US) or type P1 (EU EN 143) particle respirator.For higher level protection use type OV/AG/P99 (US) or type ABEK-P2 (EU EN 143) respirator cartridges. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU). Section 9 - Physical and Chemical Properties Physical State: Crystalline Color: White Odor: Not available. pH: Not available. Vapor Pressure: Not available. Viscosity: Not available. Boiling point: Not reported MeltingPoint: Not reported Autoignition Temperature: Not available Flash Point: Not reported Decomposition Temperature:Not available. Solubility: not available Specific Gravity/Density: no data Molecular Formula: C4H12O4S2 Molecular Weight: 188.27 Section 10 - Stability and Reactivity Chemical Stability: not available. Conditions to Avoid: Avoid moisture. Incompatibilities with Other Materials: Strong oxidizing agents. Hazardous Decomposition Products: no data found Hazardous Polymerization: Has not been reported. Section 11 - Toxicological Information Acute toxicity: no data available Skin corrosion/irritation: no data available Serious eye damage/eye irritation: no data available Respiratory or skin sensitization: no data available Germ cell mutagenicity: no data available Carcinogenicity: IARC:No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC. Reproductive toxicity: no data available Specific target organ toxicity - single exposure Inhalation - May cause respiratory irritation. Specific target organ toxicity - repeated exposure: no data available Aspiration hazard: no data available Signs and Symptoms of Exposure To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated. Additional Information: RTECS: no data available Section 12 - Ecological Information Toxicity: no data available Persistence and degradability: no data available Bioaccumulative potential: no data available Mobility in soil: no data available Other adverse effects: no data available Section 13 - Disposal Considerations Product: Observe all federal, state, and local environmental regulations. Contact a licensed professional waste disposal service to dispose of this material. Dissolve or mix the material with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber. Contaminated packaging: Dispose of as unused product. Section 14 - Transport Information 14.1 UN number ADR/RID: - IMDG: - IATA: - 14.2 UN proper shipping name ADR/RID: Not dangerous goods IMDG: Not dangerous goods IATA: Not dangerous goods 14.3 Transport hazard class(es) ADR/RID: - IMDG: - IATA: - 14.4 Packaging group ADR/RID: - IMDG: - IATA: - 14.5 Environmental hazards ADR/RID: no IMDG Marine pollutant: no IATA: no Section 15 - Regulatory Information Hazard Symbols: Not available Risk Phrases: R 36/37/38 Irritating to eyes, respiratory system and skin. Safety Phrases: S 26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice S 36 Wear suitable protective clothing WGK (Water Danger/Protection) Not available Section 16 - Additional Information While the information herein is believed to be reliable, it is furnished without warranty of any kind. It shall be used only as a guide. We assume no liabilities from the use of this product or information contained herein.
© 2006-2015 Labseeker. All Rights Reserved.