Material Safety Data Sheet
CEFPROZIL
Section 1 - Chemical Product and Company Identification
MSDS Name:CEFPROZIL
Catalog Numbers: SC-18087

Section 2 - Composition, Information on Ingredients
CAS#92665-29-7
Chemical Name: CEFPROZIL
Percent 98%min
EINECS/ELINCS: Not available
Hazard Codes: Not available
Risk Phrases: Not available

Section 3 - Hazards Identification
EMERGENCY OVERVIEW
Harmful if swallowed. May cause irritation to eyes, respiratory system and skin.
Potential Health Effects
Eye: May cause eye irritation.
Skin: May cause skin irritation. May be harmful if absorbed through the skin.
Ingestion: May be harmful if swallowed.
Inhalation: May cause respiratory tract irritation. May be harmful if inhaled.
Chronic: Limited evidence of a carcinogenic effect.

Section 4 - First Aid Measures
Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower
eyelids. Get medical aid.
Skin: Get medical aid. Flush skin with plenty of soap and water.
Ingestion: Get medical aid. Wash mouth out with water.
Inhalation: May be harmful if inhaled. Material may be irritating to mucous membranes and upper
respiratory tract.
Notes to Physician: Treat symptomatically and supportively

Section 5 - Fire Fighting Measures
General Information: As in any fire, wear a self-contained breathing apparatus in pressure-demand,
MSHA/NIOSH (approved or equivalent), and full protective gear.
Extinguishing Media: Use water spray, dry chemical, carbon dioxide, or chemical foam.

Section 6 - Accidental Release Measures
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks: Vacuum or sweep up material and place into a suitable disposal container. Do not let this
chemical enter the environment.

Section 7 - Handling and Storage
Handling: Avoid breathing dust, vapor, mist, or gas. Avoid contact with skin and eyes. Avoid ingestion
and inhalation.
Storage: Keep container tightly closed in a dry and well-ventilated place.

Section 8 - Exposure Controls, Personal Protection
Engineering Controls: Facilities storing or utilizing this material should be equipped with an eyewash
facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.
Personal Protective Equipment
Eyes: Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Provide appropriate
exhaust ventilation at places where dust is formed. Normal measures for preventive fire protection.
Skin: Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique 
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated
gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands.
Clothing: Complete suit protecting against chemicals, The type of protective equipment must be selected
according to the concentration and amount of the dangerous substance at the specific workplace.
Respirators: Complete suit protecting against chemicals, The type of protective equipment must be
selected according to the concentration and amount of the dangerous substance at the specific
workplace.

Section 9 - Physical and Chemical Properties
Physical State: Powder.
Color: Light yellow.
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 803.1 °C at 760 mmHg.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: 439.5 °C.
Decomposition Temperature: Not available
Water Solubility: Not available
Specific Gravity/Density:1.53 g/cm3.
Molecular Formula: C18H19N3O5S
Molecular Weight: 389.43.

Section 10 - Stability and Reactivity
Chemical Stability: Not available
Conditions to Avoid: Incompatible materials.
Incompatibilities with Other Materials: Strong oxidizing agents.
Hazardous Decomposition Products: Nitrogen oxides, carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.