cart(0)cart
       
Your Position: Home > DOCUMENTS & REFERENCE > MSDS > DIETHYL (2-OXOPROPYL)PHOSPHONATE

DIETHYL (2-OXOPROPYL)PHOSPHONATE

Material Safety Data Sheet

DIETHYL (2-OXOPROPYL)PHOSPHONATE   

 

Section 1 - Chemical Product and Company Identification

MSDS Name: DIETHYL (2-OXOPROPYL)PHOSPHONATE

Catalog Numbers: SC-26398

 

Section 2 - Composition, Information on Ingredients 

CAS# 1067-71-6

Chemical Name: DIETHYL (2-OXOPROPYL)PHOSPHONATE

Percent  95%

EINECS/ELINCS: Not available.

 

Section 3 - Hazards Identification 

3.1 Classification of the substance or mixture

Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.

This substance is not classified as dangerous according to Directive 67/548/EEC.

3.2 Label elements

3.3 Other hazards - none

 

4 - First Aid Measures

4.1 Description of first aid measures

If inhaled

If breathed in, move person into fresh air. If not breathing, give artificial respiration.

In case of skin contact

Wash off with soap and plenty of water.

In case of eye contact

Flush eyes with water as a precaution.

If swallowed

Never give anything by mouth to an unconscious person. Rinse mouth with water.

4.2 Most important symptoms and effects, both acute and delayed

The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in section 11

4.3 Indication of any immediate medical attention and special treatment needed

no data available

 

Section 5 - Fire Fighting Measures 

5.1 Extinguishing media

Suitable extinguishing media

Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.

5.2 Special hazards arising from the substance or mixture

Carbon oxides, Oxides of phosphorus

5.3 Advice for firefighters

Wear self-contained breathing apparatus for firefighting if necessary.

5.4 Further information

no data available

 

Section 6 - Accidental Release Measures 

6.1 Personal precautions, protective equipment and emergency procedures

Avoid breathing vapours, mist or gas.

For personal protection see section 8.  

6.2 Environmental precautions

Do not let product enter drains.

6.3 Methods and materials for containment and cleaning up

Keep in suitable, closed containers for disposal.

6.4 Reference to other sections

For disposal see section 13.

 

Section 7 - Handling and Storage 

7.1 Precautions for safe handling

Normal measures for preventive fire protection.

For precautions see section 2.2.

7.2 Conditions for safe storage, including any incompatibilities

Store in cool place. Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage.  

7.3 Specific end uses

Apart from the uses mentioned in section 1.2 no other specific uses are stipulated

Section 8 - Exposure Controls, Personal Protection 

8.1 Control parameters

Components with workplace control parameters

8.2 Exposure controls

Appropriate engineering controls

General industrial hygiene practice.

Personal Protective Equipment

Eye/face protection

Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).

Skin protection

Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices.

Wash and dry hands.

The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it.

Body Protection

Impervious clothing, The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace.

Respiratory protection

For nuisance exposures use type P95 (US) or type P1 (EU EN 143) particle respirator.For higher level protection use type OV/AG/P99 (US) or type ABEK-P2 (EU EN 143) respirator cartridges. Use respirators and components tested and approved under appropriate government standards

such as NIOSH (US) or CEN (EU).

Control of environmental exposure

Do not let product enter drains.

 

Section 9 - Physical and Chemical Properties 

Physical State:Liquid.
Color: Colorless.
Odor: Not available.

pH: Not available.

Vapor Pressure: Not available

Viscosity: Not available.

Boiling Point: Not available.
Melting point: Not available.
Autoignition Temperature: Not available

Flash Point: > 113,00 °C - closed cup.

Explosion Limits: Not available.

Explosion Limits: Not available.

Decomposition Temperature: Not available.

Specific Gravity/Density: 1,01 g/mL at 25 °C.

Molecular Formula: C7H15O4P

Molecular Weight: 194.17.

 

Section 10 - Stability and Reactivity 

10.1 Reactivity

no data available

10.2 Chemical stability

Stable under recommended storage conditions.  

10.3 Possibility of hazardous reactions

no data available

10.4 Conditions to avoid

no data available

10.5 Incompatible materials

Strong oxidizing agents

10.6 Hazardous decomposition products

Other decomposition products - No data available

In the event of fire: see section 5

 

Section 11 - Toxicological Information

11.1 Information on toxicological effects

Acute toxicity

no data available

Skin corrosion/irritation

no data available

Serious eye damage/eye irritation

no data available

Respiratory or skin sensitization

no data available

Germ cell mutagenicity

no data available

Carcinogenicity

IARC: No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC.

Reproductive toxicity

no data available

Specific target organ toxicity - single exposure

No data available  

no data available

Additional Information

RTECS: Not available

 

Section 12 - Ecological Information 

12.1 Toxicity

no data available

12.2 Persistence and degradability

no data available

12.3 Bioaccumulative potential

no data available

12.4 Mobility in soil

no data available

12.5 Results of PBT and vPvB assessment

PBT/vPvB assessment not available as chemical safety assessment not required/not conducted

12.6 Other adverse effects

no data available

 

Section 13 - Disposal Considerations

13.1 Waste treatment methods

Product : Offer surplus and non-recyclable solutions to a licensed disposal company.   

Contaminated packaging: Dispose of as unused product.

.

 

Section 14 - Transport Information 

14.1 UN number

ADR/RID: -                       IMDG: -                                              IATA: -

14.2 UN proper shipping name

ADR/RID: Not dangerous goods

IMDG: Not dangerous goods

IATA: Not dangerous goods

14.3 Transport hazard class(es)

ADR/RID: -                       IMDG: -                                             IATA: -

14.4 Packaging group

ADR/RID: -                       IMDG: -                                              IATA: -

14.5 Environmental hazards

ADR/RID: no                    IMDG Marine pollutant: no                 IATA: no

14.6 Special precautions for user

no data available

 

Section 15 - Regulatory Information 

This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.

15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture

no data available

15.2 Chemical Safety Assessment

no data available

 

Section 16 - Additional Information

While the information herein is believed to be reliable, it is furnished without warranty of any kind. It shall be used only as a guide. We assume no liabilities from the use of this product or information contained herein.

Specific target organ toxicity - repeated exposure

no data available

 

Aspiration hazard