Material Safety Data Sheet

(3S)-3-AMINO-3-(3-BROMOPHENYL)PROPANENITRILE      

 

Section 1 - Chemical Product and Company Identification

MSDS Name: (3S)-3-AMINO-3-(3-BROMOPHENYL)PROPANENITRILE   

Catalog Numbers: SC-50318

 

Section 2 - Composition, Information on Ingredients 

CAS#N/A

Chemical Name: (3S)-3-AMINO-3-(3-BROMOPHENYL)PROPANENITRILE     

Percent  95%min

EINECS/ELINCS: Not available

Hazard Codes: Not available

Risk Phrases: Not available

 

Section 3 - Hazards Identification 

EMERGENCY OVERVIEW

Harmful if swallowed. May cause irritationto eyes, respiratory system and skin.

 

Potential Health Effects

Eye: May cause eye irritation.

Skin: May cause skin irritation. May be harmful if absorbed through the skin.

Ingestion: May be harmful if swallowed.

Inhalation: May cause respiratory tract irritation. May be harmful if inhaled.

Chronic: Limited evidence of a carcinogenic effect.  

 

Section 4 - First Aid Measures 

Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.

Skin: Get medical aid. Flush skin with plenty of soap and water.

Ingestion: Get medical aid. Wash mouth out with water.

Inhalation: May be harmful if inhaled. Material may be irritating to mucous membranes and upper respiratory tract.

Notes to Physician: Treat symptomatically and supportively

 

Section 5 - Fire Fighting Measures 

General Information: As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear.

Extinguishing Media: Use water spray, dry chemical, carbon dioxide, or chemical foam.

 

Section 6 - Accidental Release Measures 

General Information: Use proper personal protective equipment as indicated in Section 8.

Spills/Leaks: Vacuum or sweep up material and place into a suitable disposal container. Do not let this chemical enter the environment.

 

Section 7 - Handling and Storage 

Handling: Avoid breathing dust, vapor, mist, or gas. Avoid contact with skin and eyes. Avoid ingestion and inhalation.

Storage: Keep container tightly closed in a dry and well-ventilated place.

 

Section 8 - Exposure Controls, Personal Protection 

Engineering Controls: Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.

 

Personal Protective Equipment

Eyes: Avoid contact with skin and eyes. Avoid formation of dust and aerosols.Provide appropriate exhaust ventilation at places where dust is formed.Normal measures for preventive fireprotection.

Skin: Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique(without touching glove's outer surface) to avoid skin contact with this product. Dispose ofcontaminated gloves after use in accordance with applicable laws and good laboratory practices.Wash and dry hands.

Clothing: Complete suit protecting against chemicals, The type of protective equipment must be selectedaccording to the concentration and amount of the dangerous substance at the specific workplace.

Respirators:Complete suit protecting against chemicals, The type of protective equipment must be selectedaccording to the concentration and amount of the dangerous substance at the specific workplace.

 

Section 9 - Physical and Chemical Properties 

Physical State:Not available.

Color: Yellow.

Odor: Not available.

pH: Not available.

Vapor Pressure:Not available.   

Viscosity: Not available.

Freezing/Melting Point:Not available.

Autoignition Temperature: Not available.

 Decomposition Temperature:Not available