cart(0)cart
       
Your Position: Home > DOCUMENTS & REFERENCE > MSDS > 3,5-Dibromo-1-methylpyridin-2(1H)-one

3,5-Dibromo-1-methylpyridin-2(1H)-one

Material Safety Data Sheet

3,5-Dibromo-1-methylpyridin-2(1H)-one 

 

Section 1 - Chemical Product and Company Identification

MSDS Name: 3,5-Dibromo-1-methylpyridin-2(1H)-one

Catalog Numbers: 86-66951

 

Section 2 - Composition, Information on Ingredients 

CAS# 14529-54-5

Chemical Name: 3,5-Dibromo-1-methylpyridin-2(1H)-one

Percent  98%

EINECS/ELINCS: Not available.

Hazard Symbols:Not available.

Risk Phrases: Not available.

 

Section 3 - Hazards Identification 

EMERGENCY OVERVIEW

Harmful if swallowed. May irritate to eyes, respiratory system and skin.

 

Potential Health Effects

Inhalation: May cause respiratory tract irritation.

Skin: May cause skin irritation.

Eyes: May cause eye irritation

Ingestion: May cause irritation of the digestive tract. The toxicological properties of this substance have not been fully investigated.

 

Section 4 - First Aid Measures

4.1 Description of first aid measures

If inhaled

If breathed in, move person into fresh air. If not breathing, give artificial respiration.  

In case of skin contact

Wash off with soap and plenty of water.  

In case of eye contact

Flush eyes with water as a precaution.  

If swallowed

Never give anything by mouth to an unconscious person. Rinse mouth with water.

 

Section 5 - Fire Fighting Measures 

General Information: As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear.

Extinguishing Media: In case of fire, use water, dry chemical, chemical foam, or alcohol-resistant foam.

 

Section 6 - Accidental Release Measures 

6.1 Personal precautions, protective equipment and emergency procedures

Avoid dust formation. Avoid breathing vapors, mist or gas.

6.2 Environmental precautions

Do not let product enter drains.

6.3 Methods and materials for containment and cleaning up

Sweep up and shovel. Keep in suitable, closed containers for disposal.

6.4 Reference to other sections

For disposal see section 13.

 

Section 7 - Handling and Storage 

Handling: Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Use with adequate ventilation. Store protected from light. Wash clothing before reuse.

Storage: Store in cool place. Keep container tightly closed in a dry and well-ventilated place.

 

Section 8 - Exposure Controls, Personal Protection 

Engineering Controls: Use adequate general or local exhaust ventilation to keep airborne concentrations below the permissible exposure limits. Use process enclosure, local exhaust ventilation, or other engineering controls to control airborne levels.

 

Personal Protective Equipment

Eye/face protection

Face shield and safety glasses Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).

Skin protection

Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands.

The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it.

Body Protection

Impervious clothing, Flame retardant antistatic protective clothing, The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace.

Respiratory protection

Where risk assessment shows air-purifying respirators are appropriate use a full-face respirator with multi-purpose combination (US) or type ABEK (EN 14387) respirator cartridges as a backup to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU).

Control of environmental exposure

Do not let product enter drains.

 

Section 9 - Physical and Chemical Properties 

Physical State: Powder.

Color: Off-white.
Odor: Not available.

pH: Not available.

Vapor Pressure: Not available.

Viscosity: Not available.

Boiling Point: Not available.
Melting point: Not available.
Autoignition Temperature: Not available.

Flash Point: Not available.

Explosion Limits: Not available.

Explosion Limits: Not available.

Decomposition Temperature: Not available.

Specific Gravity/Density: Not available.

Molecular Formula: C6H5Br2NO.

Molecular Weight: 266.92

 

Section 10 - Stability and Reactivity 

10.1 Reactivity

no data available

10.2 Chemical stability

no data available

10.3 Possibility of hazardous reactions

no data available

10.4 Conditions to avoid

no data available  

10.5 Incompatible materials

no data available

10.6 Hazardous decomposition products

Other decomposition products - no data available

 

Section 11 - Toxicological Information

11.1 Information on toxicological effects

Acute toxicity

no data available

Skin corrosion/irritation

no data available

Serious eye damage/eye irritation

no data available

Respiratory or skin sensitization

no data available

Germ cell mutagenicity

no data available

Carcinogenicity

IARC: No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC.

Reproductive toxicity

no data available

Specific target organ toxicity - single exposure

no data available

Specific target organ toxicity - repeated exposure

no data available

Aspiration hazard

no data available

Additional Information

RTECS: Not available

 

Section 12 - Ecological Information 

12.1 Toxicity

no data available

12.2 Persistence and degradability

no data available

12.3 Bioaccumulative potential

no data available

12.4 Mobility in soil

no data available

12.5 Results of PBT and vPvB assessment

no data available

12.6 Other adverse effects

 no data availabl

 

Section 13 - Disposal Considerations

13.1 Waste treatment methods

Product

Offer surplus and non-recyclable solutions to a licensed disposal company.  

Contaminated packaging

Dispose of as unused product.

 

Section 14 - Transport Information

14.1 UN number

ADR/RID: -                                  IMDG: -                                          IATA: -

14.2 UN proper shipping name

ADR/RID: Not dangerous goods

IMDG: Not dangerous goods

IATA: Not dangerous goods

14.3 Transport hazard class(es)

ADR/RID: -                                 IMDG: -                                             IATA: -

14.4 Packaging group

ADR/RID: -                                 IMDG: -                                             IATA: -

14.5 Environmental hazards

ADR/RID: no                               IMDG Marine pollutant: no               IATA: no

14.6 Special precautions for user

no data available

 

Section 15 - Regulatory Information 

This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.

15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture 

no data available  

15.2 Chemical Safety Assessment

no data available

 

Section 16 - Additional Information

While the information herein is believed to be reliable, it is furnished without warranty of any kind. It shall be used only as a guide. We assume no liabilities from the use of this product or information contained herein.