cart(0)cart
       
Your Position: Home > DOCUMENTS & REFERENCE > MSDS > 1,3-diethynylbenzene

1,3-diethynylbenzene

 

Material Safety Data Sheet
1,3-diethynylbenzene   
 
Section 1 - Chemical Product and Company Identification
MSDS Name:1,3-diethynylbenzene 
Catalog Numbers:SC-66235
 
Section 2 - Composition, Information on Ingredients 
CAS#1785-61-1
Chemical Name:1,3-diethynylbenzene
Percent  95%min
EINECS/ELINCS: Not available
Hazard Codes: F
Risk Phrases: 36/37/38-11
 
Section 3 - Hazards Identification 
EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.
 
Potential Health Effects
Eye: Causes eye irritation.
Skin: Cause skin irritation. May be harmful if absorbed through the skin.
Ingestion: May be harmful if swallowed.
Inhalation: May cause respiratory tract irritation. May be harmful if inhaled.
Chronic: Limited evidence of a carcinogenic effect.  
 
Section 4 - First Aid Measures 
Eyes: In case of eye contact,Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
Skin: In case of skin contact,Wash off with soap and plenty of water. Consult a physician.
Ingestion: If swallowed,Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
Inhalation: If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
Notes to Physician: Treat symptomatically and supportively
 
Section 5 - Fire Fighting Measures 
General Information: As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear.
Extinguishing Media: Use water spray, dry chemical, carbon dioxide, or chemical foam.
 
Section 6 - Accidental Release Measures 
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks: Vacuum or sweep up material and place into a suitable disposal container. Do not let this chemical enter the environment.
 
Section 7 - Handling and Storage 
Handling: Avoid breathing dust, vapor, mist, or gas. Avoid contact with skin and eyes. Avoid ingestion and inhalation.
Storage: Store in original container in a cool place.
Store in cool place. Keep container tightly closed in a dry and well-ventilated place. Containers which areopened must be carefully resealed and kept upright to prevent leakage.
 
Section 8 - Exposure Controls, Personal Protection 
Engineering Controls: Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.
 
Personal Protective Equipment
Eyes: Safety glasses with side-shields conforming to EN166 Use equipment for eye protection testedand approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin: Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique(without touching glove's outer surface) to avoid skin contact with this product. Dispose ofcontaminated gloves after use in accordance with applicable laws and good laboratory practices.Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC andthe standard EN 374 derived from it.
Clothing: Complete suit protecting against chemicals, The type of protective equipment must be selectedaccording to the concentration and amount of the dangerous substance at the specific workplace.
Body Protection:impervious clothing, The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace.
Respirators:Where risk assessment shows air-purifying respirators are appropriate use a full-face respiratorwith multi-purpose combination (US) or type ABEK (EN 14387) respirator cartridges as a backupto engineering controls. If the respirator is the sole means of protection, use a full-face supplied airrespirator. Use respirators and components tested and approved under appropriate governmentstandards such as NIOSH (US) or CEN (EU).
 
Section 9 - Physical and Chemical Properties 
Physical State: Liquid
Color: Colorless
Odor: Not available.
pH: Not available.
Vapor Pressure:Not available. 

 

Viscosity: Not available.
Boiling Point: 188 - 189 °C - lit.  
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available
Flash Point:73 °C - closed cup.
Decomposition Temperature:Not available
Water Solubility: Not available
Specific Gravity/Density: 0,949 g/mL at 25 °C.
Molecular Formula:C10H6.
Molecular Weight:126.15.
 
Section 10 - Stability and Reactivity 
Chemical Stability: no data available.
Conditions to Avoid: Heat, flames and sparks.
Incompatibilities with Other Materials: Strong oxidizing agents.
Hazardous Decomposition Products: Other decomposition products - no data available
Hazardous Polymerization: Has not been reported.
 
Section 11 - Toxicological Information 
RTECS#:Not available.
CAS# 1785-61-1.
LD50/LC50: RTECS:Not available.
CAS#Not available.
Carcinogenicity:
1,3-diethynylbenzene E,95%min- Not listed as a carcinogen by ACGIH, IARC, NTP, or CA Prop 65.
Epidemiology: No information found
Other Studies: The toxicological properties have not been fully investigated. See actual entry in RTECS for complete information.
 
Section 12 - Ecological Information 
12.1 Toxicity
no data available
12.2 Persistence and degradability
no data available
12.3 Bioaccumulative potential
no data available
12.4 Mobility in soil
no data available
12.5 Results of PBT and vPvB assessment
no data available
12.6 Other adverse effects
no data available
 
Section 13 - Disposal Considerations 
Product:This combustible material may be burned in a chemical incinerator equipped with an afterburner andscrubber. Offer surplus and non-recyclable solutions to a licensed disposal company.
Contaminated packaging:Dispose of as unused product.
 
Section 14 - Transport Information 
14.1 UN number
ADR/RID: -                                        IMDG: -                               IATA: -
14.2 UN proper shipping name
ADR/RID: Not dangerous goods
IMDG: Not dangerous goods
IATA: Not dangerous goods
14.3 Transport hazard class(es)
ADR/RID: -                                         IMDG: -                                IATA: -
14.4 Packaging group
ADR/RID: -                                          IMDG: -                                 IATA: -
14.5 Environmental hazards
ADR/RID: no                                        IMDG Marine pollutant: no                  IATA: no
14.6 Special precautions for user
no data available
 
Section 15 - Regulatory Information 
European Labeling in Accordance with EC Directives
      Hazard Class:F
       Risk Phrases:
            R36/37/38: Irritating to eyes, respiratory system and skin
            R11: Highly Flammable
       Safety Phrases:
            S22: Do not breathe dust
            S24/25: Avoid contact with skin and eyes
            S36/37/39: Wear suitable protective clothing, gloves and eye/face protection

                           

 
 
 
 
 
-----------------------------------------------------------------------------------------------------------------------------------

 

           S15: Keep away from heat
           S3/7/9:Keep container tightly closed in a cool place and Keep container in a well-ventilated place
 
Section 16 - Additional Information
While the information herein is believed to be reliable, it is furnished without warranty of any kind. It shall be used only as a guide. We assume no liabilities from the use of this product or information contained herein.