Material Safety Data Sheet
loteprednol etabonate

 

Section 1 - Chemical Product and Company Identification
MSDS Name: loteprednol etabonate
Catalog Numbers: SC-16151

 

Section 2 - Composition, Information on Ingredients
CAS#82034-46-6
Chemical Name: loteprednol etabonate
Percent 99%min
EINECS/ELINCS: Not available
Hazard Codes: Not available
Risk Phrases: Not available

 

Section 3 - Hazards Identification
EMERGENCY OVERVIEW
Harmful if swallowed. May cause irritation to eyes, respiratory system and skin.

 

Potential Health Effects
Eye:May cause eye irritation.
Skin: May be harmful if absorbed through skin. May cause skin irritation.
Ingestion: May be harmful if swallowed.
Inhalation: May be harmful if inhaled. May cause respiratory tract irritation.
Chronic: Limited evidence of a carcinogenic effect.

 

Section 4 - First Aid Measures
Eyes: In case of eye contact,Flush eyes with water as a precaution.
Skin: In case of skin contact,Wash off with soap and plenty of water.
Ingestion: If swallowed,Never give anything by mouth to an unconscious person. Rinse mouth with water.
Inhalation: If breathed in, move person into fresh air. If not breathing, give artificial respiration.
Notes to Physician: Treat symptomatically and supportively

 

Section 5 - Fire Fighting Measures
General Information: As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear.
Extinguishing Media: Use water spray, dry chemical, carbon dioxide, or chemical foam.

 

Section 6 - Accidental Release Measures
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks: Vacuum or sweep up material and place into a suitable disposal container. Do not let this chemical enter the environment.

 

Section 7 - Handling and Storage
Handling: Avoid breathing dust, vapor, mist, or gas. Avoid contact with skin and eyes. Avoid ingestion and inhalation.
Storage: Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
Recommended storage temperature: -20 °C

 

Section 8 - Exposure Controls, Personal Protection
Engineering Controls: Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.

Personal Protective Equipment
Eyes: Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin: Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands.
Clothing: Complete suit protecting against chemicals, The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace.
Respirators:Respiratory protection is not required. Where protection from nuisance levels of dusts are desired, use type N95 (US) or type P1 (EN 143) dust masks. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU).

 

Section 9 - Physical and Chemical Properties
Physical State: Powder.
Color: White.
Odor: Not available.
pH: Not available.
Vapor Pressure: 6.65E-17mmHg at 25°C .
Viscosity: Not available.
Boiling Point: 600.1°C at 760 mmHg .
Freezing/Melting Point:Not available.
Autoignition Temperature: Not available.
Flash Point: 316.7°C.
Decomposition Temperature: Not available.

Water Solubility: Not available.
Specific Gravity/Density:1.31g/cm3 .
Molecular Formula: C24H31ClO7.
Molecular Weight:466.95

 

Section 10 - Stability and Reactivity
Chemical Stability: Not available
Conditions to Avoid: no data available
Incompatibilities with Other Materials: Strong oxidizing agents.
Hazardous Decomposition Products: Other decomposition products - no data available
Hazardous Polymerization: Has not been reported.

 

Section 11 - Toxicological Information
RTECS#: Not available
CAS#82034-46-6
LD50/LC50: RTECS: Not available
Carcinogenicity:IARC:No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC.
loteprednol etabonate,99%min- Not listed as a carcinogen by ACGIH, IARC, NTP, or CA Prop 65.Epidemiology: No information found
Other Studies: The toxicological properties have not been fully investigated. See actual entry in RTECS for complete information.

 

Section 12 - Ecological Information
12.1 Toxicity
no data available
12.2 Persistence and degradability
no data available
12.3 Bioaccumulative potential
no data available
12.4 Mobility in soil
no data available
12.5 Results of PBT and vPvB assessment
no data available
12.6 Other adverse effects
no data available

 

Section 13 - Disposal Considerations
Dispose of in a manner consistent with federal, state, and local regulations.

 

Section 14 - Transport Information
14.1 UN number
ADR/RID: -       IMDG: -            IATA: -
14.2 UN proper shipping name
ADR/RID: Not dangerous goods
IMDG: Not dangerous goods
IATA: Not dangerous goods
14.3 Transport hazard class(es)
ADR/RID: -           IMDG: -              IATA: -
14.4 Packaging group
ADR/RID: -        IMDG: -               IATA: -
14.5 Environmental hazards
ADR/RID: no IMDG Marine pollutant: no IATA: no
14.6 Special precautions for user
no data available

 

Section 15 - Regulatory Information
European Labeling in Accordance with EC Directives
          Hazard Class:Not available
             Risk Phrases:
                Not reported
           Safety Phrases:
               Not reported

 

Section 16 - Additional Information
While the information herein is believed to be reliable, it is furnished without warranty of any kind. It shall be used only as a guide. We assume no liabilities from the use of this product or information contained herein.