cart(0)cart
       
Your Position: Home > DOCUMENTS & REFERENCE > MSDS > Fmoc-beta-homo-Asp(OtBu)-OH

Fmoc-beta-homo-Asp(OtBu)-OH

Material Safety Data Sheet
Fmoc-beta-homo-Asp(OtBu)-OH 
Section 1 - Chemical Product and Company Identification
MSDS Name: Fmoc-beta-homo-Asp(OtBu)-OH
Catalog Numbers: SC-24390

Section 2 - Composition, Information on Ingredients 
CAS#209252-17-5
Chemical Name: Fmoc-beta-homo-Asp(OtBu)-OH
Percent  98%
2.1 Classification of the substance or mixture
Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.
2.2 Label elements
Caution - substance not yet tested completely.
2.3 Other hazards - none

Section 3 - Hazards Identification 
EMERGENCY OVERVIEW
Harmful if swallowed. May irritate to eyes, respiratory system and skin.

Potential Health Effects
Inhalation:  If breathed in, move person into fresh air. If not breathing, give artificial respiration.
Skin: In case of skin contact, Wash off with soap and plenty of water. 
Eyes: In case of eye contact, Flush eyes with water as a precaution.  Ingestion: If swallowed, Never give anything by mouth to an unconscious person. Rinse mouth with water. 
Section 4 - First Aid Measures
Ingestion: Never give anything by mouth to an unconscious person. Get medical aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.
Eyes: Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.
Skin: Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.
Inhalation: Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.
Notes to Physician:

Section 5 - Fire Fighting Measures 
5.1 Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
5.2 Special hazards arising from the substance or mixture
Carbon oxides, nitrogen oxides (NOx)
5.3 Advice for firefighters
Wear self contained breathing apparatus for fire fighting if necessary.
5.4 Further information
no data available 
 Section 6 - Accidental Release Measures 
6.1 Personal precautions, protective equipment and emergency procedures
Avoid dust formation. Avoid breathing vapors, mist or gas.
6.2 Environmental precautions
Do not let product enter drains.
6.3 Methods and materials for containment and cleaning up
Sweep up and shovel. Keep in suitable, closed containers for disposal.
6.4 Reference to other sections
For disposal see section 13. 
Section 7 - Handling and Storage 
7.1 Precautions for safe handling
Provide appropriate exhaust ventilation at places where dust is formed.
7.2 Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
Recommended storage temperature: 2 - 8 °C
7.3 Specific end uses
no data available

Section 8 - Exposure Controls, Personal Protection 
Engineering Controls: Use adequate general or local exhaust ventilation to keep airborne concentrations below the permissible exposure limits. Use process enclosure, local exhaust ventilation, or other engineering controls to control airborne levels.

Personal Protective Equipment
Eyes Protection: Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).

Skin Protection: Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it.
Body Protection : Choose body protection in relation to its type, to the concentration and amount of dangerous substances, and to the specific work-place., The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection: Respiratory protection is not required. Where protection from nuisance levels of dusts are desired, use type N95 (US) or type P1 (EN 143) dust masks. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU).  
Clothing: Wear appropriate protective clothing to minimize contact with skin.
Respirators: Wear a NIOSH/MSHA or European Standard EN 149 approved full-facepiece airline respirator in the positive pressure mode with emergency escape provisions.

Section 9 - Physical and Chemical Properties 
Physical State: Powder
 Color: White.
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available
Viscosity: Not available.
Boiling Point: Not available.
Melting point: Not available.
Autoignition Temperature: Not available
Flash Point: Not available.
Explosion Limits: Not available.
Explosion Limits: Not available.
Decomposition Temperature: Not available.
Specific Gravity/Density: Not available.
Molecular Formula: C24H27NO6
Molecular Weight: 425.47

Section 10 - Stability and Reactivity 
Chemical Stability: no data available.
Conditions to Avoid: no data available
Incompatibilities with Other Materials: Strong oxidizing agents.
Hazardous Decomposition Products: Other decomposition products - no data available
Hazardous Polymerization: Other decomposition products - no data available

Section 11 - Toxicological Information
RTECS#:     
CAS# 209252-17-5:
LD50/LC50: RTECS:
CAS# 209252-17-5:
Carcinogenicity:
Fmoc-beta-homo-Asp(OtBu)-OH,98%- Not listed as a carcinogen by ACGIH, IARC, NTP, or CA Prop 65.
Other Studies: The toxicological properties have not been fully investigated.

Section 12 - Ecological Information 
12.1 Toxicity
no data available
12.2 Persistence and degradability
no data available
12.3 Bioaccumulative potential
no data available
12.4 Mobility in soil
no data available
12.5 Results of PBT and vPvB assessment
no data available
12.6 Other adverse effects
no data available 
Section 13 - Disposal Considerations 
13.1 Waste treatment methods
Product :Offer surplus and non-recyclable solutions to a licensed disposal company.
Contaminated packaging: Dispose of as unused product.  .

Section 14 - Transport Information 
14.1 UN number
ADR/RID: -                       IMDG: -                                              IATA: -
14.2 UN proper shipping name
ADR/RID: Not dangerous goods
IMDG: Not dangerous goods

IATA: Not dangerous goods
14.3 Transport hazard class(es)
ADR/RID: -                       IMDG: -                                             IATA: -
14.4 Packaging group
ADR/RID: -                       IMDG: -                                              IATA: -
14.5 Environmental hazards
ADR/RID: no                    IMDG Marine pollutant: no                 IATA: no
14.6 Special precautions for user
no data available

Section 15 - Regulatory Information 
This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture
no data available
15.2 Chemical Safety Assessment
no data available

Section 16 - Additional Information
While the information herein is believed to be reliable, it is furnished without warranty of any kind. It shall be used only as a guide. We assume no liabilities from the use of this product or information contained herein.