Material Safety Data Sheet
3-bromopyridin-2(1H)-one

 

Section 1 - Chemical Product and Company Identification
MSDS Name: 3-bromopyridin-2(1H)-one
Catalog Numbers: SC-00866

 

Section 2 - Composition, Information on Ingredients
CAS#13466-43-8
Chemical Name: 3-bromopyridin-2(1H)-one
Percent 98%
EINECS/ELINCS: Not available
Hazard Codes: Xn,Xi
Risk Phrases: 36/37/38-41-22

 

Section 3 - Hazards Identification
EMERGENCY OVERVIEW
Harmful if swallowed. Causes eye burns.May be harmful if absorbed through skin. Causes skin irritation.

Potential Health Effects
Eye: Causes eye burns.
Skin: May be harmful if absorbed through skin. Causes skin irritation.
Ingestion: Harmful if swallowed.
Inhalation: May be harmful if inhaled. Causes respiratory tract irritation.
Chronic: Limited evidence of a carcinogenic effect.

 

Section 4 - First Aid Measures
Eyes: In case of eye contact,Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
Skin: In case of skin contact,Wash off with soap and plenty of water. Consult a physician.
Ingestion: If swallowed,Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
Inhalation: If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
Notes to Physician: Treat symptomatically and supportively.

 

Section 5 - Fire Fighting Measures
General Information: As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear.
Extinguishing Media: Use water spray, dry chemical, carbon dioxide, or chemical foam.

 

Section 6 - Accidental Release Measures
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks: Vacuum or sweep up material and place into a suitable disposal container. Do not let this chemical enter the environment.

 

Section 7 - Handling and Storage
Handling: Avoid breathing dust, vapor, mist, or gas. Avoid contact with skin and eyes. Avoid ingestion and inhalation.
Conditions for safe storage, including any incompatibilities:
Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
Recommended storage temperature: 2 - 8 °C.
Heat-, light-, and moisture-sensitive. Air sensitive. Handle and store under inert gas.

 

Section 8 - Exposure Controls, Personal Protection
Engineering Controls: Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.

Personal Protective Equipment
Eyes: Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Provide appropriate exhaust ventilation at places where dust is formed.Normal measures for preventive fire protection.
Skin: Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands.
Clothing: Complete suit protecting against chemicals, The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace.
Respirators:Complete suit protecting against chemicals, The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace.

 

Section 9 - Physical and Chemical Properties
Physical State: Crystalline powder.
Color: White.
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 179-183.

Autoignition Temperature: Not available
Flash Point: Not available.
Decomposition Temperature: Not available
Decomposition Temperature: Not available
Water Solubility: Not available
Specific Gravity/Density: Not available.
Molecular Formula: C5H4BrNO
Molecular Weight: 174

 

Section 10 - Stability and Reactivity
Chemical Stability: no data available.
Conditions to Avoid: no data available
Incompatibilities with Other Materials: Oxidizing agents
Hazardous Decomposition Products: no data available.
Hazardous Polymerization: Has not been reported.

 

Section 11 - Toxicological Information
RTECS#: Not available.
CAS#13466-43-8
LD50/LC50: RTECS: Not available.
CAS#Not available.
Carcinogenicity:IARC: No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC.
3-bromopyridin-2(1H)-one ,98%- Not listed as a carcinogen by ACGIH, IARC, NTP, or CA Prop 65.Epidemiology: No information found
Other Studies: The toxicological properties have not been fully investigated. See actual entry in RTECS for complete information.

 

Section 12 - Ecological Information
a health hazard

 

Section 13 - Disposal Considerations
Dispose of in a manner consistent with federal, state, and local regulations.

 

Section 14 - Transport Information
Shipping Name: not regular

 

Section 15 - Regulatory Information
European Labeling in Accordance with EC Directives
               Hazard Class: Xn,Xi
                     Risk Phrases:
                          R36/37/38: Irritating to eyes, respiratory system and skin
                          R41: Risk of serious damage to eyes
                          R22: Harmful if swallowed
                     Safety Phrases:
                          S26: In case of contact with eyes, rinse immediately with plenty of water and seek medical advice
                          S36: Wear suitable protective clothing
                          S39: Wear eye/face protection

Section 16 - Additional Information
While the information herein is believed to be reliable, it is furnished without warranty of any kind. It shall be used only as a guide. We assume no liabilities from the use of this product or information contained herein.